Core tool video: Test of Understanding PPAP - Exide Technologies

Your email address:

Your name:

Company name:

Question 1 of 10

1. PPAP is an output of:

The APQP process

The purchasing process

The product delivery process

The FMEA process

Question 1 of 10

Question 2 of 10

2. The purpose of PPAP is:

To verify the effectiveness of the purchasing process

Show the effectiveness of the product design process

To confirm all customer engineering design record and specification requirements are properly understood by the organisation

Provide documentation to archive for a minimum of 20 years

Question 2 of 10

Question 3 of 10

3. A significant production run is:

Typically 1-8 hours production, 300 parts

Typically 1 hour production, 100 parts

Typically 1 week production, 1000 parts

Typically 1 month production, 10,000 parts

Question 3 of 10

Question 4 of 10

4. For a tool with multiple cavities:

Parts shall only be taken from one cavity for the PPAP

Parts shall be sampled from at least 2 of the cavities

Parts shall be selected and measured from each cavity

Parts shall be randomly selected to improve the chance of measuring parts from each cavity

Question 4 of 10

Question 5 of 10

5. For a part submission warrant:

One shall be produced for each different part number

The format will depend on customer specific requirements

Provides evidence to the customer that all their requirements have been met during a production run at the required production rate

All of the above are correct

Question 5 of 10

Question 6 of 10

6. For a level 1 PPAP submission:

Only the warrant needs to be provided to the customer

All the contents of the PPAP file need to be submitted to the customer

There is no need to submit any information toe customer

The probability is the process will produce 0.01% defects

Question 6 of 10

Question 7 of 10

7. A reason for a resubmission of PPAP may include?

A new perishable tool

A shift change

A change in supplier for parts or materials

A change in Quality Manager

Question 7 of 10

Question 8 of 10

8. Records of PPAP shall be retained for:

10 years

Length of time part is active plus 10 years

Length of time that the product is active for production and service requirements, plus one calendar year

1 year

Question 8 of 10

Question 9 of 10

9. A PPAP submission typically includes:

18 sections

5 sections

50 sections

24 sections

Question 9 of 10

Question 10 of 10

10. A PPAP submission would include the following:

MSA studies

Checking aids

Dimensional results

All the above

Question 10 of 10

Call Us: +44(0) 7341 845 930

Core tool video: Test of Understanding PPAP – Exide Technologies