Core tool video: Test of Understanding Measurement Gauge R and R destructive – Exide Technologies Your email address: Your name: Company name: Start Quiz! 0% Question 1 of 10 1. A gauge R and R nested study evaluates:Reliability and repeatabilityRepeatability and replicationRepeatability and reproducibilityRepair and reworkQuestion 1 of 10Question 2 of 10 2. A reason for undertaking a MSA nested study may include:There are customer returnsThere is a change in the work environmentThere is a change in the measurement methodAll of the aboveQuestion 2 of 10Question 3 of 10 3. The nested method of Gauge R and R can be used:When the measurement process destroys the partWhere only one appraiser is availableWhen the parts used in the study can be measurement more than onceTo replace the need for calibrationQuestion 3 of 10Question 4 of 10 4. How many samples to destruct are required for each appraiser assuming three trails?33010100Question 4 of 10Question 5 of 10 5. The parts used for a Gauge R and R nested study:Must be selected to try to minimise the variation in the batch for the studyMust include out of specification partsMust be provided by the customerCan be returned to production as good parts at the end of the studyQuestion 5 of 10Question 6 of 10 6. A normal acceptance value from a gauge R and R nested study is:Less than 30% Gauge R and RLess than 10%Less than 50%0%Question 6 of 10Question 7 of 10 7. If AV is large compared to EV this means:The greater proportion of the variation is coming from the equipmentThe greater proportion of variation is coming from the environmentThe study results are not acceptableThe greater proportion of the variation is coming from the appraisersQuestion 7 of 10Question 8 of 10 8. A typical acceptance value for the number of distinct categories (NDC) is:Greater than 5Greater than 10No applicable for variable equipment Gauge R and R nested studiesGreater than 100Question 8 of 10Question 9 of 10 9. The use of graphical analysis from the results of a R and R nested study:Is a useful tool to help to interpret the resultsDoes not provide any added valueReplaces the need for analytical resultsIs not possible as the measurement breaks the partsQuestion 9 of 10Question 10 of 10 10. A gauge R and R nested study should be performed:At least annuallyWhen any change in the destructive measurement system is proposedAt least monthlyAs a one off event and never repeatedQuestion 10 of 10 Loading...