Core tool video: Test of Understanding Measurement Gauge R and R for non-destructive equipment - Exide Technologies

Your email address:

Your name:

Company name:

Question 1 of 10

1. A gauge R and R study evaluates

Reliability and repeatability

Repeatability and replication

Repeatability and reproducibility

Repair and rework

Question 1 of 10

Question 2 of 10

2. A reason for undertaking a MSA study may include:

There are customer returns

There is a change in the work environment

There is a change in the measurement method

All of the above

Question 2 of 10

Question 3 of 10

3. The cross tabulation method can be used:

When the measurement process destroys the part

Where only one appraiser is available

When the parts used in the study can be measurement more than once

To replace the need for calibration

Question 3 of 10

Question 4 of 10

4. How many parts are usually used for a MSA gauge R and R study?

100

Question 4 of 10

Question 5 of 10

5. The parts used for a Gauge R and R study:

Must be selected sequentially

Must include out of specification parts

Should represent the normal production process variation

Cannot be used, they must be scrapped after the study

Question 5 of 10

Question 6 of 10

6. If AV is large compared to EV this means:

The greater proportion of the variation is coming from the equipment

The greater proportion of variation is coming from the environment

The study results are not acceptable

The greater proportion of the variation is coming from the appraisers

Question 6 of 10

Question 7 of 10

7. A normal acceptance value from a gauge R and R study is:

Less than 30% Gauge R and R

Less than 50%

Less than 10%

Question 7 of 10

Question 8 of 10

8. A typical acceptance value for the number of distinct categories (NDC) is:

Greater than 5

Greater than 10

No applicable for variable equipment Gauge R and R studies

Greater than 100

Question 8 of 10

Question 9 of 10

9. In a gauge R and R study:

The part to part variation should be small compared to the measurement system variation

The measurement system variation should be small when compared with the repeatability

The measurement system variation should be small compared with the part to part variation

The measurement system variation should be small compared with the reproducibility

Question 9 of 10

Question 10 of 10

10. A gauge R and R study should be performed

At least annually

When any change in the measurement system is proposed

At least monthly

As a one off event and never repeated

Question 10 of 10

Call Us: +44(0) 7341 845 930

Core tool video: Test of Understanding Measurement Gauge R and R for non-destructive equipment – Exide Technologies